Ms. Shelby Luo
Senin için ne yapabilirim?
| Ödeme şekli: | T/T,D/P,D/A |
| Incoterm: | CFR,CIF,EXW,FOB,FAS,FCA,DDP,DDU |
| Min. sipariş: | 100 Kilogram |
| Ulaşım: | Ocean,Land,Air,Express |
| Liman: | Shenzhen,Guangzhou |
Gölge:
model numarası.: 1M PA66 Rod
Marka: XYH
Origin: Çin
belgeleme: ROHS
İşleme Hizmeti: Kalıplama
Ürün adı: PA6 Nylon Rod
Material: Polyamide 6
Color: White，Blue，Black...
Diameter: 5-300mm
Density: 1.2-1.3g/cm3
Length: 1000mm
Uygulama: Industrial Applications
Certificationz: ROHS
Feature: Good wear resistance
Rated Voltage: 600V
Tensile Strength: 70-80MPa
| Satış Birimleri | : | Kilogram |
| Paket Türü | : | Paletler veya Ahşap kutu |
The file is encrypted. Please fill in the following information to continue accessing it
| Property | Typical Value | Why It Matters |
| Material | PA6 / Polyamide 6 | A general-purpose engineering nylon for machined industrial components |
| Density | 1.14–1.16 g/cm³ | Offers useful weight reduction compared with metal parts |
| Tensile strength, dry | 70–85 MPa | Supports structural parts under moderate mechanical load |
| Elongation at break | 20–50% | Indicates a useful balance of strength and toughness |
| Hardness | Shore D 80–85 | Provides a firm surface for guides, rollers and wear parts |
| Continuous service temperature | -40°C to +100°C (-40°F to +212°F) | Suitable for many general industrial environments |
| Short-term temperature | Up to approximately 150°C (302°F) | Short peaks must be reviewed together with load and exposure time |
| Coefficient of friction | 0.25–0.40, standard natural grade | Useful for sliding parts; oil-filled nylon should be considered where lower friction is required |
| Water absorption, 24 hours | Approximately 1.5–2.5% | Moisture conditioning can influence fit and final dimensions |
| Saturation water absorption | Approximately 6–7% | Precision components require allowance for moisture-related dimensional change |
| Application | What the Buyer Usually Needs | Selection Note |
| Bushings and sleeves | Wear resistance, low noise and stable running | Check clearance, moisture and whether lubrication is available |
| Rollers and pulleys | Impact resistance and reduced weight | Confirm shaft load, speed and operating temperature |
| GearsGears | Toughness, quieter operation and machinability | Tooth load, module, speed and lubrication must be reviewed |
| Wear pads and guides | Low metal contact and replaceable wear surfaces | Check contact pressure, sliding speed and mating material |
| Spacers and structural parts | Low weight, toughness and easy custom machining | Allow for temperature and humidity where tolerances are tight |
| Jigs and machine components | Fast prototyping and repeatable custom shapes | Provide datum points, critical dimensions and inspection requirements |
| Requirement | PA6 Nylon Rod | POM / Acetal Rod |
| Toughness and impact | Often the better starting point | Good, but generally less tough than PA6 |
| Moisture resistance | Absorbs moisture; dimensional allowance is important | Lower water absorption and better dimensional stability |
| Precision-fit parts | Suitable when conditioning and clearance are controlled | Usually preferred for tight tolerances in humid service |
| General wear parts | Good balance of wear, toughness and cost | Good low-friction and stable machining performance |
| Typical decision | Choose when toughness and practical wear performance lead | Choose when dimensional stability and low moisture uptake lead |
Hakkımızda
Contal ABD
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Şimdi başvurun